JBs Wear 2018 Catalogue

7

Benchmark Product Certification

BSI Group ANZ Pty Ltd (BSI) has developed the BSI Benchmark Product Certification Criteria (Benchmark) for

Oil Resistant Sole

Kick Off Lugs At Heel

manufacturers and suppliers of product certification products supplied into the Australian market. The Benchmark Brand belongs to BSI and is an accredited JAS-ANZ product certification scheme.

PRODUCT ICONOGRAPHY

Bump Cap

Anti-Static

Anti Fog

PU Injected Sole

Flex Zone Technology

Treatment that prevents the condensation of water on lenses creating the illusion of fog.

STEEL

Polarised

Shock Absorbent Heel

Steel Toe Cap

Polarized eyewear designed to reduce glare from surfaces such as water, snow, and glass.

COMP

Composite Toe Cap

TPU/PU Sole Construction

Recycled

Products that are or can be recycled and made suitable for re-use.

Hi Visibility – Day & Night

Australian Standards

Australian Standards

The garment is highly visible in daylight and features reflective material for heightened night-time visibility.

EN388 Mechanical Risks Rating:

AS/NZS:1906.4:2010 AS/NZS:4602.1:2011 Day & Night

AS/NZS:4602.1999 AS/NZS:1906.4:2010 Day & Night

EN388 standard covers 4 main areas of concern for mechanical hazards, and these areas are graded by a number, as per the table below: 1 is the lowest rating, and highest rating as below.

EN388

Hi Visibility – Day Only

4 1 3 1

Australian Standards

Australian Standards

The garment is highly visible in the daylight.

AS/NZS:1906.4:2010 AS/NZS:4602.1:2011 Day & Night

AS/NZS:4602.1999 AS/NZS:1906.4:2010 Day & Night

A: Resistance to Abrasion B: Blade Cut Resistance C: Tear Resistance D: Puncture Resistance

1 to 4 1 to 5 1 to 4 1 to 4

Hi Visibility – Night

EN511 Cold Protection:

The garment is highly visible in the Night.

EN511

EN511 standard measures cold protection. This standard applies to any gloves to protect the hands against convective and contact cold down to -50 degrees Celsius The pictogram will be accompanied by a 3 -digit code

X 2 X

3M™ Scotchlite™ Reflective Material

3M™ Scotchlite™ Reflective Material – Fabrics are designed for use on safety garments and in athletic and casual wear. When properly used,

• The first digit is for resistance to convective cold (performance level 0 -4) • The second digit is for resistance to contact cold (performance level 0 -4)The higher performance level the better insulating capacity. • The third digit is for permeability to water (performance level 0 or 1)

3M™ Scotchlite™ Reflective Material helps enhance the visibility of the wearer in night time or low-light conditions when illuminated by a light source, such as headlights, by returning the light back toward the original source and reaching the automobile driver’s eye.

0 = water penetration after 30 minutes 1 = no water penetration after 30 minutes. Where not suitable or tested an “X” is marked

SAI Global Product Certification

Category 2 - Intermediate

SAI Global Product Certification Services provides third party assurance that a particular product meets the specified requirements of a nominated product standard. SAI Global Standards-mark™ on the product represents reliability, quality assurance and safety.

Gloves of intermediate design, for intermediate risks.

Made with FlippingBook - professional solution for displaying marketing and sales documents online